Lumenock Burt Coyote X Green.

Lighted nock that is activated by the force applied to it at the release of the arrow. Nock fits Easton Axis, Beman Max 4 and Black Max shafts. Green in color.

Lumenock GT Nock, Green.

Lighted nock that is activated by the force applied to it at the release of the arrow. Five sizes to fit most carbon arrows and aluminum shafts (using a uni-bushing). Weighs aprox 25gr.. One nock per pack in fl. green.

Lumenock GT Nock. Qty. 1

Lightweight: It adds only a few grains to the weight of the archer's nock. 26.2 Gr.

Self Contained: The Lumenock requires no magnets, no glue; it contains no switch or any other moving parts. There is nothing to attach to your bow, or glue into your arrow to make it work.
Fits most popular arrows.

Easy To Install: Just remove the original nocks from your arrows and insert the Lumenock. When the nock is fully seated against the electrically conductive end of the carbon or aluminum arrow shaft, the Lumenock lights. Wiggling the nock back and forth in the shaft breaks electrical contact between the arrow shaft and the Lumenock, causing the light to go off. At this point the archer can put the Lumenock equipped arrow in his quiver and forget about it. It will automatically be activated upon release of the arrow when shot, allowing the archer to more easily follow the flight of his arrow. The Lumenock will remain lit for up to 40 hours or until retrieved and is turned off by wiggling it back and forth. These nocks will operate hundreds of times.

Lumenock Super Nock, Green.

Lighted nock that is activated by the force applied to it at the release of the arrow. Five sizes to fit most carbon arrows and aluminum shafts (using a uni-bushing). Weighs aprox 25gr.. One nock per pack in fl. green.

Super Lumenock., Qty 1.

Lightweight: It adds only a few grains to the weight of the archer's nock. 24.7 Gr.

Self Contained: The Lumenock requires no magnets, no glue; it contains no switch or any other moving parts. There is nothing to attach to your bow, or glue into your arrow to make it work.Fits most popular arrows.

Easy To Install: Just remove the original nocks from your arrows and insert the Lumenock. When the nock is fully seated against the electrically conductive end of the carbon or aluminum arrow shaft, the Lumenok lights. Wiggling the nock back and forth in the shaft breaks electrical contact between the arrow shaft and the Lumenock, causing the light to go off. At this point the archer can put the Lumenock equipped arrow in his quiver and forget about it. It will automatically be activated upon release of the arrow when shot, allowing the archer to more easily follow the flight of his arrow. The Lumenock will remain lit for up to 40 hours or until retrieved and is turned off by wiggling it back and forth. These nocks will operate hundreds of times.

Fits the Following Arrows: Beman ICS, Carbon Tech, Vapor.