|
 |
| BA6079 |
Bohning Empty 2oz. Dispenser Bottle. |
Price |
 |
Bohning Empty 2oz. Dispenser Bottle.
Empty 2 oz dispenser bottle. |
1: $2.39
 |
| BA1649 |
Bohning Feather Fletching Tape. |
Price |
 |
Bohning Feather Fletching Tape.
Easily applied, creates a strong ad reliable bond on contact. Will fletch over 3 1/2 dozen arrows.
More Information:
Feather Clamp Time: On contact
Directions: Apply tape to feather quill. Trim with scissors, leave 1/8" overhang on each end. Remove tape backing. Press feather firmly onto arrow shaft. Make sure base fully contacts shaft.
|
1: $7.29
|
| BA1633 |
Bohning Ferr-L-Tite. |
Price |
 |
Bohning Ferr-L-Tite.
Hot melt cement, heat reversible. Tough elastic, waterproof bond that adheres points and inserts to aluminum or wood shafts. Stick or brick form.
More Informaiton:
Cure Time: 24 Hours
Directions: Using an open flame heat adhesive. Apply to insert. Install insert and rotate one full turn. Wipe excess adhesive from shaft.
|
1: $2.49
2+: $1.75
|
| BA1638 |
Bohning Fletchtite Platinum 3/4 oz. Adhesive. |
Price |
 |
Bohning Fletchtite Platinum 3/4 oz. Adhesive.
Provides an extremely tough, durable bond, remains flexible and water repellent. Platinum provides you with an incredible bond with cedar, fiberglass, aluminum, or carbon shafts.
More Information:
Vane Clamp Time: 2-3 Minutes
Feather Clamp Time: 15-20 Minutes
Directions for Fletching: Apply thin bead to vane or feather base. Place fletching. Make sure base fully contacts shaft.
Directions for Nocks: Apply small amount to nock. Install nock and rotate one full turn.
|
1: $3.49
|
| BA34077 |
Bohning Fletchtite Platinum Adhesive, Pint |
Price |
 |
Bohning Fletchtite Platinum Adhesive, Pint
Provides an extremely tough, durable bond, remains flexible and water repellent. Platinum provides you with an incredible bond with cedar, fiberglass, aluminum, or carbon shafts. More Information:
Vane Clamp Time: 2-3 Minutes
Feather Clamp Time: 15-20 Minutes
Directions for Fletching: Apply thin bead to vane or feather base. Place fletching. Make sure base fully contacts shaft.
Directions for Nocks: Apply small amount to nock. Install nock and rotate one full turn. |
1: $15.49
|
| BA34078 |
Bohning Fletchtite Platinum Adhesive, Quart |
Price |
| |
Bohning Fletchtite Platinum Adhesive, Quart Provides an extremely tough, durable bond, remains flexible and water repellent. Platinum provides you with an incredible bond with cedar, fiberglass, aluminum, or carbon shafts. More Information:
Vane Clamp Time: 2-3 Minutes
Feather Clamp Time: 15-20 Minutes
Directions for Fletching: Apply thin bead to vane or feather base. Place fletching. Make sure base fully contacts shaft.
Directions for Nocks: Apply small amount to nock. Install nock and rotate one full turn. |
1: $22.99
|
| BW13601610B |
Bohning Glue Dispenser Bottle w/ Tip |
Price |
 |
Bohning Glue Dispenser Bottle w/ Tip.
Clear bottle with applicator tip designed to hold 2 oz. of solvent or adhesive. Comes with red cap for air tight seal. |
1: $1.99
2+: $1.89
|
| BA1317 |
Bohning Insert Iron. |
Price |
 |
Bohning Insert Iron.
The newest generation of Insert Adhesive!
Welds Inserts & Outserts to all shaft types!
Stronger Than the Competition!
Insert Iron is the adhesive that gives your arrow shaft an "Iron Grip" on all inserts, outserts and points. Creates ahigh impact, shock resistant, heat reversible bondwith tenacious holding power. Cures in 24 hours. No mixing, no mess. Available in a 1 oz. bottle.
(Apply new adhesive once "heat reversed")
|
1: $7.99
|
| BA1302 |
Bohning Instant Gel Adhesive, 20 Grm. |
Price |
 |
Bohning Instant Gel Adhesive, 20 Grm.
Quick set cement in an easy to use gel for fletching vanes and feathers to aluminum, carbon, fiberglass and wood shafts.
More Information:
Vane and Feather Clamp Time: 25 seconds
Torsional Strength: 2700 psi
Directions for Fletching: Apply thin bead to vane or feather base. Place fletching. Make sure base fully contacts shaft.
(Do not use on inserts)
|
1: $10.29
|
| BA1305 |
Bohning Instant Gel Adhesive, 3 Grm. |
Price |
| |
Bohning Instant Gel Adhesive, 3 Grm.
Quick set cement in an easy to use gel for fletching vanes and feathers to aluminum, carbon, fiberglass and wood shafts.
More Information:
Vane and Feather Clamp Time: 25 seconds
Torsional Strength: 2700 psi
Directions for Fletching: Apply thin bead to vane or feather base. Place fletching. Make sure base fully contacts shaft.
(Do not use on inserts)
|
1: $4.39
|
| BA1314 |
Bohning Quantom X Cement. |
Price |
 |
Bohning Quantom X Cement.
Instantly bonds nocks, vanes, feathers and inserts. A "flex" agent makes Quantum extremely impact resistant.
More Information:
Vane and Feather Clamp Time: 8 seconds
Torsional Strength: 3750 psi
Directions for Fletching: Apply thin bead to vane or feather base. Place fletching. Make sure base fully contacts shaft.
Directions for Inserts: Apply small amount to nock. Install nock and rotate one full turn.
|
1: $10.99
2+: $10.25
|
| BA1314XT |
Bohning Quantum XT Adhesive. |
Price |
 |
Bohning Quantum XT Adhesive. Instantly bonds nocks, vanes, feathers and inserts. Super strong, super fast and incredibly impact resistant. |
1: $12.95
|
| Displaying 1 to 12 (of 12 products) |
Result Pages: 1 |
|
|
|  |
