BPE Left Helical Clamp.

Extra Pro Series Clamps

BPE Pro Series Left Fletcher.

Constructed of aluminum and glass filled nylon for individual or commercial use. This fletcher will do 3 fletch 120°, 4 fletch 75°x105°, 60°x120°, 90°x90°, 5 fletch; 6 fletch 60° and any other combination. Will also fletch cock fletch up, down, out or any other angle desired. The indexable upper shaft support is designed to hold each size shaft from 14/64" (.218") to 25/64" (.391") perfectly centered through the use of exact sized and numbered slots. The shafts cannot move while applying the fletching. Added features include hardened indexing contact points for non-wearing accuracy, no ball bearing or disks to fool with and 3" x 5" data index cards are available to record information for quick setup at a later date.

BPE Pro Series Right Fletcher.

Constructed of aluminum and glass filled nylon for individual or commercial use. This fletcher will do 3 fletch 120°, 4 fletch 75°x105°, 60°x120°, 90°x90°, 5 fletch; 6 fletch 60° and any other combination. Will also fletch cock fletch up, down, out or any other angle desired. The indexable upper shaft support is designed to hold each size shaft from 14/64" (.218") to 25/64" (.391") perfectly centered through the use of exact sized and numbered slots. The shafts cannot move while applying the fletching. Added features include hardened indexing contact points for non-wearing accuracy, no ball bearing or disks to fool with and 3" x 5" data index cards are available to record information for quick setup at a later date.

BPE Pro Series Straight Fletcher.

Constructed of aluminum and glass filled nylon for individual or commercial use. This fletcher will do 3 fletch 120°, 4 fletch 75°x105°, 60°x120°, 90°x90°, 5 fletch; 6 fletch 60° and any other combination. Will also fletch cock fletch up, down, out or any other angle desired. The indexable upper shaft support is designed to hold each size shaft from 14/64" (.218") to 25/64" (.391") perfectly centered through the use of exact sized and numbered slots. The shafts cannot move while applying the fletching. Added features include hardened indexing contact points for non-wearing accuracy, no ball bearing or disks to fool with and 3" x 5" data index cards are available to record information for quick setup at a later date.

BPE Right Helical Arrow Fletcher

Constructed of sturdy aluminum and nylon with many features found in more expensive products. Nylon is used because it is not affected by common fletching cements. The clamp is graduated for easy fletching placement. Adjust for either three 120° fletch or 75° x 105° four fletch. Large, easy-to-turn index knob with zero index position marked. It will also allow placement of the cock feather down.

BPE Right Helical Clamp.

Extra Pro Series Clamps

BPE Straight Arrow Fletcher.

Constructed of sturdy aluminum and nylon with many features found in more expensive products. Nylon is used because it is not affected by common fletching cements. The clamp is graduated for easy fletching placement. Adjust for either three 120° fletch or 75° x 105° four fletch. Large, easy-to-turn index knob with zero index position marked. It will also allow placement of the cock feather down.

BPE Straight Clamp.

Extra Pro Series Clamps