WASP Archery Products has introduced a new generation of fixed blade broadheads designed for high speed accuracy. The BOSS features a shortened aerodynamic ferrule, reduced blade surface area and SST tip alignment. The result is a very forgiving and accurate shooting arrow that delivers a sharp, strong, deep penetrating broadhead with the Cut-On-Contact trocar tip right on target.

WASP Archery Products has introduced a new generation of fixed blade broadheads designed for high speed accuracy. The BOSS features a shortened aerodynamic ferrule, reduced blade surface area and SST tip alignment. The result is a very forgiving and accurate shooting arrow that delivers a sharp, strong, deep penetrating broadhead with the Cut-On-Contact trocar tip right on target.

WASP Archery Products has introduced a new generation of fixed blade broadheads designed for high speed accuracy. The BOSS features a shortened aerodynamic ferrule, reduced blade surface area and SST tip alignment. The result is a very forgiving and accurate shooting arrow that delivers a sharp, strong, deep penetrating broadhead with the Cut-On-Contact trocar tip right on target.

The Boss Bullet sports a 1" cutting diameter, .027 stainless steel blades, combined with the SST tip and superior flight characteristics - make the Boss Bullet one of the most forgiving and accurate Broadheads available today!

The WASP Hammer SST remains one of the top choices among bowhunters shooting fixed blade broadheads. Its stainless steel Trocar tip aligned with the cutting path of three razor sharp blades has set the standard for deep penetrating broadheads since its introduction. The "Smart Tip" is heat-treated to 42RC and crafted from 416 stainless steel -- tough enough to punch through the steel of 10 sections of a 55 gallon drum. The Hammer SST offers superior arrow flight in one of the strongest, yet lightest broadheads ever developed. The extra-long front foot on each blade locks the blades into place under the tip. Blades stay put even under the toughest conditions.

As with all WASP Cut-on-Contact SST broadheads, the NEW Jak-Hammer SST 1 1/4 CUT features a pre-aligned, Stainless Smart Tip (SST). WASP's exclusive SST tip is one of the sharpest and strongest tips of any broadhead on the market. The Smart Tip is heat-treated to 42RC and crafted from 416 stainless steel, giving bowhunters maximum strength and bone shattering penetration. The knife-sharp hollow ground edges of the Trocar Smart Tip are factory-aligned with the rise of three stainless steel blades creating a straight cutting path that opens a gapping wound channel, ensuring maximum penetration. .036 blades deploy on impact, opening to a cutting diameter of 1 1/4.

When it comes to reliable performance in a mechanical broadhead, nothing comes close to the WASP Jak-Hammer SST. As with all WASP SST broadheads, the Jak-Hammer features a pre-aligned, Stainless Smart Tip (SST). The edges of the Trocar, Smart Tip are factory -aligned with the rise of the three stainless steel blades creating a straight cutting path that opens a gapping wound channel, ensuring maximum penetration. The three surgically sharp stainless steel blades fold forward in flight and are retained by an O-ring. Blades deploy on impact and fold back to a cutting diameter of 1-3/4 inches on the 100 grain Jak-Hammers. The Jak-Hammer SST also has a unique feature which allows for target practice without damage to the broadhead or blades. When blades are in the forward flight position, take Spider Wireª fishing line or thin copper wire and put 6 to 8 wraps around the outside of the forward notches. This prevents the blades from deploying, even when shot into high density foam targets.

When it comes to reliable performance in a mechanical broadhead, nothing comes close to the WASP Jak-Hammer SST. As with all WASP SST broadheads, the Jak-Hammer features a pre-aligned, Stainless Smart Tip (SST). The edges of the Trocar, Smart Tip are factory -aligned with the rise of the three stainless steel blades creating a straight cutting path that opens a gapping wound channel, ensuring maximum penetration. The three surgically sharp stainless steel blades fold forward in flight and are retained by an O-ring. Blades deploy on impact and fold back to a cutting diameter of 1-3/4 inches on the 125 grain Jak-Hammers. The Jak-Hammer SST also has a unique feature which allows for target practice without damage to the broadhead or blades. When blades are in the forward flight position, take Spider Wireª fishing line or thin copper wire and put 6 to 8 wraps around the outside of the forward notches. This prevents the blades from deploying, even when shot into high density foam targets.

When it comes to reliable performance in a mechanical broadhead, nothing comes close to the WASP Jak-Hammer SST. As with all WASP SST broadheads, the Jak-Hammer features a pre-aligned, Stainless Smart Tip (SST). The edges of the Trocar, Smart Tip are factory -aligned with the rise of the three stainless steel blades creating a straight cutting path that opens a gapping wound channel, ensuring maximum penetration. The three surgically sharp stainless steel blades fold forward in flight and are retained by an O-ring. Blades deploy on impact and fold back to a cutting diameter of 1-1/4 inches on the 75 grain. The Jak-Hammer SST also has a unique feature which allows for target practice without damage to the broadhead or blades. When blades are in the forward flight position, take Spider Wireª fishing line or thin copper wire and put 6 to 8 wraps around the outside of the forward notches. This prevents the blades from deploying, even when shot into high density foam targets.