Search: 
 
Manufacturers: 
   Home   Account Login   Shipping/Returns   Coupons   Contact Us   Arrow Sizing Charts   Pro Shop   Order Tracking   

Bohning

 BA8362   Bohning Big Jig Offset Clamp.   Price 
  Bohning Big Jig Offset Clamp.    

Bohning Big Jig Offset Clamp.

Replacement clamp for Big Jig. Fletches arrows on a 1° offset.

 1: $11.49 

Buy Now  

 BA8251   Bohning Blazer Fletching Jig Replacement Clamp W/ 1 piece of tef   Price 
  Bohning Blazer Fletching Jig Replacement Clamp W/ 1 piece of tef    

Bohning Blazer Fletching Jig Replacement Clamp W/ 1 piece of teflon Tape

An Actual Helix designed specifically for 19/64" diameter shafts. Tape applies to clamps to prevent adhesive build-up. 

Mfg Number: 8251

 1: $8.99 

Buy Now  

 BA35665   Bohning Blazer Helix Fletching Jig.   Price 
  Bohning Blazer Helix Fletching Jig.    

Bohning Blazer Helix Fletching Jig.

"The only fletching jig with a HELICAL designed for 2" vanes!" Designed for standard carbon shaft diameters, the Blazer Helix Jig will give you the perfect helical for the Blazer® or any 2" vane. Increased accuracy and arrow flight that will flat out amaze you! Easy to set-up and simple operation. Instructions included. Places 3 vanes 120 degrees apart.

• Fletches vanes with 3° right helical
• Works for up to 2.25” (57mm) vanes
• Designed for standard diameter shafts

Mfg Number: 1344

 1: $38.99 

Buy Now  

 BA8250   Bohning Blazer STR8 Clamp   Price 
  Bohning Blazer STR8 Clamp    

Bohning Blazer STR8 Clamp

• Replacement clamp for Blazer® STR8 jig
• Designed for small carbon shafts
• Provides straight vane placement for vanes up to 2.25”

Mfg Number: 8250

 1: $9.99 

Buy Now  

 BA1345   Bohning Blazer STR8 Fletching Jig.   Price 
  Bohning Blazer STR8 Fletching Jig.    

Bohning Blazer STR8 Fletching Jig.

The Blazer STR8 Jig, designed for small carbon shafts, provides straight vane placement for vanes up to 2". Easy set-up and simple operation.Places 3 vanes 120˚ apart.

Mfg Number: 1345

 1: $39.99 

Buy Now  

 BA80090   Bohning Complete Tower Jig Kit   Price 
  Bohning Complete Tower Jig Kit    

Tower fletching jig allows you to fletch all three vanes at once. Includes 7 sets of arms - Straight (Up to 4” vane), 1 degree offset (Up to 4” vane), 3 degree right helical (Up to 2.25” vanes), 1 degree offset (for Impulse vanes), 2 degree right wing feather, 2 degree left wing feather arms, and Mylar vane arms. Center posts for standard carbon, F nock, A nock, pin nock, HE nock, swedged shafts and crossbow bolts are also included. Three different clamping rings accept any size arrow shaft.

Mfr. # 601027

 1: $81.99 

Buy Now  

 BA68156   Bohning Crossbow Tower Fletching Jig   Price 
  Bohning Crossbow Tower Fletching Jig    

Bohning Crossbow Tower Fletching Jig

The Crossbow Tower® is a fletching system that accommodates .2985 and .303 shaft size arrows and allows you to fletch 3 vanes at once precisely 120° apart, and reduces your fletching time to a third!  Includes the crossbow center post and two collar rings.  The Crossbow Tower® includes clamp release tape and 2 sets of  arms: black for a 3° helical and red for a 2° right offset.   The maximum vane size for fletching is 2.25" for Helical, and 4" for Offset.  The Tower® is not for use with swedged end shafts or feathers.  The Tower® saves time, increases arrow production and provides the easiest and most precise vane placement!

Mfg Number: 601001

 

 1: $50.99 

Buy Now  

 BA601010   Bohning Feather Tower   Price 
  Bohning Feather Tower    

Bohning Feather Tower

A Tower® jig designed specifically for feathers!  The Feather Tower® reduces your fletching time to a third, increasing arrow production and providing the easiest and most precise 3-feather placement 120° apart. The Feather Tower® accommodates all size arrows from small carbon X10s up to Fat Boys. The Feather Tower® also includes 2 sets of arms for Right or Left Wing applications, both at a 1 degree helical and will fletch feathers up to 5" in length. Posts included are Standard, F Nock and Swedged.  Every Tower® includes clamp release tape and 2 collar rings:  red for use with small carbon up to aluminum shafts, and green for use with fat boy shafts.   All Tower® System arms are compatible with the Tower® Jig base, replacement or additional arm sets are sold separately.  

 
Mfg Number: 601010

 

 

 1: $59.99 

Buy Now  

 BA66404   Bohning Feather Tower Jig Replacement Arms Left Wing.   Price 
  Bohning Feather Tower Jig Replacement Arms Left Wing.    

All tower arms are compatible with the tower jig base, no need to purchase additional jigs for Impulse, Crossbow or Feather fletchings.  

green - Feather arms (1 degree Left Wing) ARMS ONLY.
 
Mfg Number: 601008L
 1: $13.99 

Buy Now  

 BA66403   Bohning Feather Tower Jig Replacement Arms Right Wing.   Price 
  Bohning Feather Tower Jig Replacement Arms Right Wing.    

All tower arms are compatible with the tower jig base, no need to purchase additional jigs for Impulse, Crossbow or Feather fletchings.  

blue - Feather arms (1 degree Right Wing) ARMS ONLY.
 
Mfg Number: 601008R
 1: $13.99 

Buy Now  

 BA45805   Bohning Helix Tower Fletching Jig.   Price 
  Bohning Helix Tower Fletching Jig.    

Bohning Helix Tower Fletching Jig.

Accepts "press fit" nock style shafts. Fletches vanes up to 2" in length on a 3 degree right "helical". Designed for 17/64" (Axis) up to 23/64" shafts. Comes with 2 Pressure rings allowing you to apply the perfect amount of pressure on different diameter shafts! Ring marked "S" for standard carbon & small diameter shafts. Ring marked "L' for aluminum & larger diameter carbon arrow shafts.

Mfg Number: 12962

 1: $52.99 

Buy Now  

 BA601007   Bohning Impulse Tower Replacement Arms.   Price 
  Bohning Impulse Tower Replacement Arms.    

All tower arms are compatible with the tower jig base, no need to purchase additional jigs for Impulse, Crossbow or Feather fletchings.  

Yellow -  Impulse™ replacement arms ONLY (1 degree helical).
 
Mfg Number: 601007
 1: $16.99 

Buy Now  

 BA601006   Bohning Impulse Tower.   Price 
  Bohning Impulse Tower.    

Like EVERY jig in the Tower® line, the Impulse™ Tower® Jig is the most precise way to fletch 3 Impulse™ vanes perfectly, simultaneously and easily.  The Impulse™ Tower® Jig fletches 3 Impulse™ vanes (either 3” or 4”) at once, placing the vanes 120° apart and at a 1° helical.  The fletching arms are interchangeable with the existing Tower® models, and are available for purchase separately if you already have a Tower® Jig.  The Impulse™ Arms are specifically designed to hold the thinner hybrid material used in the Impulse™ vanes.  The Impulse™ Tower® includes the Standard Post, Pin-Nock Post and F-Nock Post, 2 clamp rings for small (x10) to large (fat boy) shaft sizes, and clamp release tape.

Not for use with swedged end shafts.

Mfg Number: 601006
 1: $59.99 

Buy Now  

 BA601035   Bohning Mylar Vane Tower Fletching Jig   Price 
  Bohning Mylar Vane Tower Fletching Jig    

• Specially designed arms to fletch mylar "tape on style" vanes
• Provides easy & precise 3-vane placement 120 degrees apart
• Red clips can be adjusted for left or right hand shooters
• Includes center posts for standard carbon, F nock, A nock, pin nock & crossbow sized shafts
• Includes clamp release tape and 2 Tower rings to accommodate any shaft size

Mfr. #601035

 

 1: $589.99 

Buy Now  

 BA27230   Bohning Pro Class Jig Clamp Right Helical   Price 
  Bohning Pro Class Jig Clamp Right Helical    

Replacement clamp for the Bohning Pro Class Fletching Jig.

mfr #1352 

 1: $8.49 

Buy Now  

 BA27229   Bohning Pro Class Jig Clamp Straight   Price 
  Bohning Pro Class Jig Clamp Straight    

Replacement clamp for the Bohning Pro Class Fletching Jig

mfr #1351 

 1: $8.49 

Buy Now  

 BA27228   Bohning Pro Fletch Tool w/ Left Wing Clamp.   Price 
  Bohning Pro Fletch Tool w/ Left Wing Clamp.    

Bohning Pro Fletch Tool w/ Left Wing Clamp.

Perfect fletch every time! Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment and accurate snap indexing.

Mfg Number: 1350

 1: $27.99 

Buy Now  

 BA27227   Bohning Pro Fletch Tool w/ Right Wing Clamp.   Price 
  Bohning Pro Fletch Tool w/ Right Wing Clamp.    

Bohning Pro Fletch Tool w/ Right Wing Clamp.

Prefect fletch every time! Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment and accurate snap indexing.

Mfg Number: 1349

 1: $27.99 

Buy Now  

 BA27226   Bohning Pro Fletch Tool w/ Straight Clamp.   Price 
  Bohning Pro Fletch Tool w/ Straight Clamp.    

Bohning Pro Fletch Tool w/ Straight Wing Clamp.

Prefect fletch every time! Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment and accurate snap indexing.

Mfg Number: 1348

 1: $27.99 

Buy Now  

 BA1200   Bohning Replacement Tower Arms 2 Degree Offset   Price 
  Bohning Replacement Tower Arms 2 Degree Offset    

All tower arms are compatible with the tower jig base, no need to purchase additional jigs for Impulse, Crossbow or Feather fletchings.  

red -  2 degree offset- ARMS ONLY.
Includes clamp release tape and 3 replacement tower arms.
 
Mfg Number: 1200
 1: $16.49 

Buy Now  

 BA1202   Bohning Replacement Tower Arms 3 Degree Helical   Price 
  Bohning Replacement Tower Arms 3 Degree Helical    

All tower arms are compatible with the tower jig base, no need to purchase additional jigs for Impulse, Crossbow or Feather fletchings.

Includes clamp release tape and 3 replacement tower arms.

Mfg Number: 1202

 1: $16.49 

Buy Now  

 BA1201   Bohning Replacement Tower Arms Straight   Price 
  Bohning Replacement Tower Arms Straight    

Bohning Replacement Tower Arms Straight

All tower arms are compatible with the tower jig base, no need to purchase additional jigs for Impulse, Crossbow or Feather fletchings.

Includes clamp release tape and 3 replacement tower arms.

Mfg Number: 1201

 1: $16.49 

Buy Now  

 BA47176   Bohning The Big Jig.   Price 
  Bohning The Big Jig.    

Bohning The Big Jig.

The Big Jig is designed to fletch up to a 4" vane. Comes with two clamps, one degree right offset and three degree right helical. The Big Jig will allow you to fletch any size arrow shaft from an X-10 to a 27/64 diameter line cutter.

Mfg Number: 1320

 1: $44.95 

Buy Now  

 BA47175   Bohning Tower Fletching Jig Triple Tower   Price 
  Bohning Tower Fletching Jig Triple Tower    

Bohning Tower Fletching Jig Triple Tower

Tower fletching jig allows you to fletch all three vanes at once. Includes 3 sets of arms – Straight (Up to 4” vane), 1 degree offset (Up to 4” vane), and 3 degree right helical (Up to 2.25” vanes). Center posts for standard carbon, F nock, A nock, pin nock, and crossbow bolts are also included. Two different clamping rings accept any size arrow shaft. 

Mfg Number: 12963

 1: $74.99 

Buy Now  

 BA80091   Bohning Tower XL Ring Orange   Price 
  Bohning Tower XL Ring Orange    

Orange is for extra large shafts size 21/64 and larger.

Mfg Number: 601036
 1: $4.99 

Buy Now  

Displaying 1 to 25 (of 25 products) Result Pages:  1